Please use the default credentials below to log into the download software.

Username:	admin
Password:	admin

These login details are assigned to the system administrator. Once you have logged in, it is advisable that you change the password for this user.

Below are the changes to the latest release and prior release of IDSwift 2:

IDSwift 2.2.7 build 44
 * General 
    - Change the processing so that if the user name is wrong at login the application informs the user
        and allows him to continue entering rather than terminating the application.
  * X Series
    - Allow for characters [A-F] in the IMEI numbers for Hyyp. 
    - Improve the handling of connections terminated for unkown reason.
    
IDSwift 2.2.7 build 36
 * X Series
    - Added version 2.7x panels.

 * X Series 2.6x (and higher)
    - Added the new aXess event FIRE DOOR OPEN

 * X Series 2.7x
  - Added Bi-Directional functionality for X-Wave 2 into IDSwift
  - Added a new keypad option - Buzzer Follows Siren
  - Added a new keypad option - Global Keypad Chimes For All Chime Zones
  - Added a new option - Dialer retry wait time MM:SS
  - Added a new option - Event Log output
  - Added a new Event AN ARMING TAG WAS PRESENTED AT A READER
  - Added a new Event AN ARMING REMOTE BUTTON WAS RECEIVED    
    
IDSwift 2.2.6 build 27
 * X Series 2.60
    - Added aXess transaction history to the panel event log.

IDSwift 2.2.6 build 24
 * X Series
    - Extra Global Options
        4> Box Tamper Always trigger Alarm 
        5> Bus-wired peripheral tamper Always trigger Alarm 
        6> Zone Tampers trigger Alarm Always
    - Added version 2.6x panels.
    - Added aXess functionality for cards and doors to version 2.6x panels. 

IDSwift 2.2.5 build 42
 * General 
    - Improvements made for 56k Modem and Hyyp.
    - Extended 56k Modem dialing time length.
    
 * X Series
    - Added HYYP connections to version 2.50 panels.
    
IDSwift 2.2.5 build 32
 * General 
    - Only allow a single version of IDSwift 2.2.5.0 (or higher) to run on a computer.
 * X Series  
    - Added the USER UNBYPASSED ZONES (87) error log event for version 2.50 and above
    - Updated the USER BYPASSED ZONES - USER (65) error log event to have partition data  for version 2.50 and above
    - Add the partition data to the error log exports
 * X8 2.50 Added Functionality
    - Zone programmable output always triggers
    - Allow/Deny Voice Module Logins.
    - Allow AC Fail time to be set to 00:00.
    - Added event log entry 86 "DTMF Login Lockout".
    - Programmable output expanders.
 * X16 2.50 Added Functionality
    - Zone programmable output always triggers
    - Allow/Deny Voice Module Logins.
    - Allow AC Fail time to be set to 00:00.
    - Added event log entry 86 "DTMF Login Lockout".
    - Programmable output expanders.
 * 805 and 805s Added Functionality
    - Add backward compatible download codes for early versions of IDSwift. This is checked on the client account maintenance form.
    
IDSwift 2.2.4 build 2
 * X64 2.50 Added Functionality
    - Zone programmable output always triggers
    - Allow/Deny Voice Module Logins.
    - Allow AC Fail time to be set to 00:00.
    - Added event log entry 86 "DTMF Login Lockout".
    
IDSwift 2.2.4 build 0
 * Added Panel X64 version 2.50, with programmable output expanders.
   
IDSwift 2.2.3 build 1
 * Added violations and tamper warning to 805.
 * Added violations and tamper warning to x-series (firmware version 2 and above).
 * Added print event logs to the 805s
 * Added zone tampering and zone violations to the 805 panel status functionality. 
      Note tampers will only reflect if the panel has been set to enable 
            tamper per zone (System > Global Options > 11:Tamper per zone > Enable tamper per zone)    
 * Added print functionality to the following forms
   - Panel Event Log 
      + Print the event log. 
   - Audit Event Log 
      + Print the audit log.
   - Import and Export Client 
      + Print the import client list, showing selections.
      + Print the export client list, showing selections.
   - User Group Management
      + Print the users list.
      + Print user groups list.
   - Form User Management
      + Print users list.
      + Print user groups list.
   - Client Account Management
      + Print Current Client Accounts as seen on screen.  
   * 805 event log changes, the event log now shows the time since last power up for entries after the most recent power up.
 * Make the client name, in the client account management grid, sort without case sensitivity.
 * Add a separate column for the X-Series event logs.
 * Improved speed during the loading of a client account form.
 * When importing and exporting all for the selecting all, deselecting all, and inverting current selection on the grid. Also
      allow for the grid to be sorted using clicks on the grid title/header.
 * When maintaining a template allow for system default templates, which cannot be altered, to be filtered out.  
 * When selecting a template show the template description along with the template comment.
 * Event log can be sorted by clicking on the title/header.
 * 805 Event Log has a sequence number in the event log.
 * Allow the cancel of event log downloading.
 
IDSwift 2.2.1 build 31
 * Make the client name, in the client account management grid, sort with case sensitivity.
 * IDSwift 2 now supports the X-Series 2.40 of alarm control panels
 
IDSwift 2.2.0 build 6
 * IDSwift 2 now supports the X8 2.30 series of alarm control panels
 * Partial upload/download will now be more efficient when uploading data in bulk
 * The X-series panel status dialogue will now show more descriptive information when
   there is an error from the alarm panel